Emerson Micro Motion F-Series Sensor Manuale di Installazione Scaricare il pdf (Pagina 19)

Sensor Installation: F-Series 19

Wiring

Figure 13 Wrapping the shield drain wires

e. Place the shielded heat shrink over the exposed shield drain wire(s). The tubing should completely

cover the drain wires.

f. Without burning the cable, apply heat (250 °F or 120 °C) to shrink the tubing.

Figure 14 Applying the heat shrink

g. Position gland clamping insert so the interior end is flush with the heat shrink.

h. Fold the cloth shield or braid and drain wires over the clamping insert and approximately 1/8 inch

(3 mm) past the O-ring.

Figure 15 Folding the cloth shield

i. Install the gland body into the core processor housing conduit opening.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25 26

Nessun commento

Emerson Micro Motion F-Series Sensor Manuale di Installazione Pagina 19