
Bulletin 74.1:T205
2
Specications
The Specications section on this page provides the ratings and other specications for the T205 Series. Factory specication
such as type, maximum inlet pressure, maximum temperature, maximum outlet pressure, spring range and orice size are
stamped on the nameplate fastened on the regulator at the factory.
Product Congurations
Type T205: Tank blanketing regulator with outlet
pressure range of 1 in. w.c. to 7 psig / 2.5 mbar to
0.48 bar in seven different spring ranges and has
internal pressure registration requiring no downstream
control line.
Type T205M: Similar to Type T205 but has a blocked
throat and a downstream control line connection for
external pressure registration.
Body Sizes and End Connection Styles
See Table 1
Maximum Allowable Inlet Pressure
(1)
See Table 1
Maximum Operating Inlet Pressure
(1)
See Table 2
Maximum Outlet (Casing) Pressure
(1)
Gray cast iron: 35 psig / 2.4 bar
WCC Carbon steel or CF8M/CF3M Stainless steel:
75 psig / 5.2 bar
Maximum Emergency Outlet Pressure to Avoid Internal
Parts Damage
(1)
With Nitrile (NBR) or Fluorocarbon (FKM)
diaphragm: 35 psig / 2.4 bar
With Fluorinated Ethylene Propylene (FEP)
diaphragm: 10 psig / 0.69 bar
Outlet (Control) Pressure Range
(1)
See Table 3
Shutoff Classication per ANSI/FCI 70-3-2004
Class VI (Soft Seat)
Pressure Registration
Type T205: Internal
Type T205M: External
Orice Size and Flow Coefcients
See Table 5
Body and Casing Materials
Gray cast iron, WCC Carbon steel and
CF8M/CF3M Stainless steel
(2)
Trim Materials
See Table 4
Flow Capacities
See Tables 7 to 10
C
v
Coefcients
See Tables 11 and 12
Material Temperature Capabilities
(1)(3)
Elastomer Parts
Nitrile (NBR):
-40 to 180°F / -40 to 82°C
Fluorinated Ethylene Propylene (FEP):
-20 to 180°F / -29 to 82°C
Fluorocarbon (FKM):
40 to 300°F / 4 to 149°C
Ethylene Propylene Diene (EPDM):
-20 to 225°F / -29 to 107°C
Peruoroelastomer (FFKM):
0 to 300°F / -18 to 149°C
Body Materials
Gray Cast Iron: -20 to 300°F / -29 to 149°C
WCC Carbon Steel: -20 to 300°F / -29 to 149°C
CF8M/CF3M Stainless Steel:
-40 to 300°F / -40 to 149°C
Spring Case Vent Connection
1/4 NPT
Diaphragm Case Control Line Connection
(Type T205M)
1/2 NPT
Approximate Weight
17.7 lbs / 8 kg
1. The pressure/temperature limits in this Bulletin and any applicable standard or code limitation should not be exceeded.
2. Pipe nipples and anges are 316 Stainless steel for anged body assemblies.
3. See Table 4 for operating temperature ranges for available trim combinations.
Introduction
T205 Series tank blanketing regulator is a direct-operated
and spring-loaded regulator (Figure 1). The regulator
prevents a stored liquid from vaporizing into the atmosphere,
reduces liquid combustibility and prevents oxidation or
contamination of the product by reducing its exposure
to air. T205 Series maintains a slightly positive pressure
and thereby reduces the possibility of tank wall collapse
during pump out operation. T205 Series is available in two
congurations: Type T205 for internal pressure registration
and Type T205M for external pressure registration.
Principle of Operation
T205 Series tank blanketing regulator controls the vapor space
pressure over a stored liquid. When liquid is pumped out of the
tank or vapors in the tank condense, the pressure in the tank
decreases. Tank pressure is sensed by the actuator diaphragm.
Spring force pushes the pusher post assembly, the valve disk
moves away from the orice, allowing the gas ow to increase
to maintain tank pressure. See Figures 2 and 3.
When pressure in the tank increases, the actuator
diaphragm is pushed. Through the action of the pusher post
assembly, lever and valve stem, the valve disk moves closer
to the orice reducing gas ow.
Commenti su questo manuale