Emerson S4K2UC Manuale Utente Scaricare il pdf (Pagina 4)

INTELLISLOT RELAY CARD USER MANUAL | 4

2.0 Installation

2.1 Required Parts & Tools

NOTE: Make sure you have the following parts and tools before you begin the installation.

• IntelliSlot relay card (provided)

• #2 (medium) Phillips or small athead screwdriver

2.2 Installation Instructions

1. Turning o the UPS prior to installation is suggested, although not required.

2. Locate the IntelliSlot port. (See examples in Figure 1.) Refer to the UPS user manual for port location and orientation.

3. Remove the two retaining screws from the IntelliSlot port cover plate (see Figure 1). Save the screws for reassembly in

Step 5.

4. Insert the IntelliSlot relay card. Make sure the holes are aligned with those on the UPS. Initially, the card should slide in

freely as you carefully align the screw holes. As you feel it click into place, press rmly to ensure solid seating in the slot.

5. Use the screwdriver to secure the IntelliSlot relay card to the UPS chassis with the two retaining screws removed in Step 3.

Make sure the screws are snug, not tight, to avoid damage to the device.

Remove screws

IntelliSlot

Relay Card

Figure 1: Installation

6. Use these guidelines for terminal block specications:

Acceptable wire size: 24–16 AWG

Wire strip length: 0.24–0.28 in. (6–7 mm)

Please proceed to Sections “3.0 Pin Conguration” and “4.0 Jumper Setup” to congure the terminal blocks and jumpers.

1 2 3 4 5 6 7 8

Nessun commento

Emerson S4K2UC Manuale Utente Pagina 4