Emerson Fisher 4320 Manuale delle Istruzioni Pagina 30
- Pagina / 68
- Indice
- RISOLUZIONE PROBLEMI
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
Instruction Manual
D103621X012
4320 Position Monitor
April 2014
30
the state of the network interface. It also allows device calibration and enables turning on/off the local HART port
(located inside the cover) used with a handheld device, such as the 475 or 375 Field Communicator.
Power
The power status menu is entered from the STATUS menu by pressing SELECT. Press SELECT to see the voltage of the
power module. Press NEXT to display the estimated remaining life of the power module.
Note
The remaining life value of the power module is an estimate. The life span of the power module is affected by many operating
conditions, including: Power module type. The update or burst rate of the 4320 wireless position monitor. The number of devices
operating through this device to the gateway and their update or burst rates. Network changes causing more or less traffic
through the device; for example, a failure in another wireless device in the mesh network, resulting in re‐routing, forcing more
traffic through the device. Temperature extremes (both high and low) will also affect the life span of the power module.
The Life menu is not available when the External Power option is installed.
From the power module life display, press NEXT to go back to the Power menu. Press NEXT to enter the Network
menu.
Network
Access the Network screen by pressing the right button (STATUS), the left button (SELECT), and then the right button
(NEXT) again.
Press SELECT to display the NETWORK ID configured in the device. Press NEXT to show the current network
operational state:
SEARCHING—the device is waiting to detect the presence of a wireless network with the same Network ID and join
key.
NEGOTIATING—the presence of a wireless network with the same network parameters has been detected and the
device is attempting to join the network.
CONNECTED—the device has detected the presence of a wireless network with the same network parameters and
has successfully joined the network.
OPERATIONAL—the device is operating within a wireless network.
DISCONNECTED—the device has become disconnected from the wireless network.
IDLE—the device has been instructed by a HART command not to attempt to participate in a wireless network.
Press NEXT to return to the Network menu.
Press the NEXT in the Network menu to see the TAG of the device. Press NEXT to view the Set Point for devices with the
on/off control option. Press the right button to view the current position of the valve or monitored equipment.
The top reading indicates % of SPAN, the state of the valve (OPEN, PARTIALLY OPEN, or CLOSED) is on the bottom line.
Press the right button to return to the STATUS menu.
Press NEXT while in the STATUS menu to access the CALIBRATE menu.
- On/Off Control Option 1
- Contents (continued) 2
- Introduction 2
- D103621X012 3
- April 2014 3
- Terminology 4
- Specifications 4
- Educational Services 4
- Installation 9
- GE57654X012 10
- GE57655X012 10
- Instruction Manual 11
- WARNING 11
- Network Setup 12
- CSA (C/US) 15
- ATEX II 1 G 16
- Valve / Actuator Mounting 19
- 4-Way Spool Valves 24
- Communication Connections 26
- Wireless Communications 26
- Basic Setup 28
- Calibrate 31
- Using the Field Communicator 33
- Guided Setup 35
- Manual Setup 37
- 37
- Alert Setup 43
- Calibration 46
- Variables 47
- Communications 49
- Maintenance 51
- Accessing Features 53
- High Precision 54
- Scaled Position 54
- Diagnostic Features 55
- Instrument Troubleshooting 60
- Replacing the instrument 61
- Replacing the Power Module 62
- Filter Replacement 66
- Repair Kits 67
- Replaceable Parts 67
Prodotti e manuali riguardandi Gateway/Controller Emerson Fisher 4320
Gateway/Controller Emerson ASCO 5350 Eight-Channel Remote Annunciator Manuale di Installazione
(12 pagine)
(12 pagine)
Gateway/Controller Emerson CSI 9420 Specifiche
(78 pagine)
(78 pagine)
Gateway/Controller Emerson 1410 Manuale Utente
(20 pagine)
(20 pagine)
Gateway/Controller Emerson MRLDS Specifiche
(22 pagine)
(22 pagine)
Gateway/Controller Emerson 1410 Manuale di Servizio
(222 pagine)
(222 pagine)
Gateway/Controller Emerson 1410 Manuale Utente
(16 pagine)
(16 pagine)
Gateway/Controller Emerson MRLDS Specifiche
(26 pagine)
(26 pagine)
Candy GO 1462D__1-36S manuály
Uživatelské manuály a uživatelské příručky pro Podložky Candy GO 1462D__1-36S.
Poskytujeme 1 manuály pdf Candy GO 1462D__1-36S ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Commenti su questo manuale